Monday, July 22, 2019
Diffusion and Osmosis Shown In Solutions Essay Example for Free
Diffusion and Osmosis Shown In Solutions Essay This lab, title Diffusion and Osmosis, was centered around the diffusion across a cellular membrane and how exactly materials move and diffuse in concentrations. Both diffusion and osmosis are forms of movement that are part of passive transport dealing with cell membranes. Diffusion is where the solutes move from an area of high concentration to a low concentration. Water goes through the cell membranes by diffusion. Osmosis is specifically the movement of water through membranes. Since osmosis and diffusion are both part of passive transport, this means that they do not require energy or pumps. There are different environments created due to diffusion. There are hypotonic, hypertonic, and isotonic environments. Hypotonic is when the solution has a lower solute concentration compared to the water potential. The hypertonic solution has a higher solute concentration and lower water potential. In an isotonic solution, there is no net movement and there is an equal concentration of solutes and water. In our lab, we modeled diffusion and osmosis with a hospital scenario. It is important for an IV solution to have salts in it so the water and solute can be equal to create an isotonic environment. If there wasnââ¬â¢t, there would either be a hypotonic causing the cell to burst, or there would be hypertonic causing the cell to shrink. We created models of living cells by using dialysis tubing. The dialysis tube represented the cell membrane to act as selectively permeable to water and some solutes. We observed different solutes (NaCl, Ovalbumin, Glucose, Sucrose, and Water) in the dialysis tubing. The problem was what environment the solutes would create and whether water would diffuse in or out of the cell. I predicted that all of the tubes will be in a hypotonic environment after the 30 minutes because there is a higher concentration of water outside the cell. The water will diffuse inside the cell, therefore the cell will gain weight. We took the initial weight of each tube with the solute inside, the final weight, and then after took the percent change in weight. The control of the experiment was the model cell where there was waterà inside and outside the cell. My data proved my hypothesis and led me to conclude that all of the solutions were in a hypotonic environment. For the second part of the experiment we were to think of an inquiry. The purpose was to identify concentrations of sucrose solutions that we were given. We were to find what solution was closest to being isotonic in order to identify which of them was water. There were 6 different solutions that we observed. There were red, orange, yellow, green, blue, and purple solutions. For my individual inquiry, I used a potato to be placed in the solutions. I found that the potato does not shrink because it has a cell wall which supports and maintains a plant cells structure. I predicted that the potato would remain the same size in the blue solution because it would have an isotonic environment. I thought that if the potato was placed in a hypotonic environment, then the percent change in mass would be greater than if placed in a hypertonic environment. Materials and Methods My tested hypothesis was that all of the dialysis tubes (cells) would have a hypotonic environment. If the dialysis tubes were placed in the beaker for 30 minutes, then after the 30 minutes, the water would diffuse in the cell, causing it to gain weight. For the first procedure, I created model cells with different solutions to determine the rate of diffusion. The weights with the filled cell models can determine rate and direction of diffusion by measuring the percent change of mass and determining the environment after the experiment. A solid control for the procedure is to use water because that is in an isotonic environment, meaning that both concentrations are equal. There were four solutions that were used in the experiment: sucrose, NaCl, glucose, and ovalbumin and the control: water. I took the five dialysis tubings which were acting as cells and filled them with 10 mL of each solution. We knotted each end but made sure to leave enough space at the top for water to diffuseà in the cell. The initial weight was taken and recorded in a data table. The five cells were placed in a beaker filled with water for 30 minutes. After the 30 minutes, the cells were weighed, and the final weight was recorded in the data table, and then the percent change was calculated. The materials used in this procedure were beakers, water, sucrose, glucose, NaCl, ovalbumin, 20 cm-long dialysis tubing and balances. In the inquiry, I predicted that the blue solution was water and that it would have an isotonic environment, meaning there would be no percent change.I first cut the potatoes into 6 cylinders of the same size by using a cork. I got six beakers and filled each with 20 mL of the different color-coated solutions with different concentrations (orange, red, yellow, green, blue purple). The initial mass of each potato cylinder was taken before placing in the solution. I placed the potatoes in the appropriate labeled beaker (1-6) of each solution and let them sit there for 30 minutes. After the 30 minutes, I took the final mass of each cylinder and calculated the percent change in mass.The materials that were used in the inquiry were potatoes, corks, pipettes, balances, scalpels, beakers, and the color-coded sucrose solutions. In this inquiry, the solutions in a hypotonic environment were red, yellow, and blue. Those solutions all had final weights that were greater than initial weights. The orange and green colors both had final weights that were smaller than their initial weights, which means they were in a hypertonic environment. The purple color was in an isotonic environment because the initial and final weights are the same. Discussion and Conclusions In conclusion, my understanding for diffusion and osmosis has been sharpened. I observed the different parts of passive transport: diffusion and osmosis. They both go with the concentration gradient from an area of high to low concentration. My hypothesis for procedure 1, that all of the dialysis tubings would be in a hypotonic environment was correct. This occurred because the tubings were placed in a beaker of water. This means that there was a higher concentration of water than the solute, causing the water to diffuse in the cell after 30 minutes. When water diffuses into the cell, this causes the cell to be enlarged. Some errors I could have made in the experiments would be failure to pay attention to the timing when the tubes and potatoes were in the solutions, inaccurate measuring when gathering the solutions and the potatoes may have not been exactly the same size. This experiment relates to the AP Biology Big ideas and Science Practices because by observing the cells, I tried to maintain equilibrium or homeostasis by being in an isotonic environment, I also used representations and models to communicate scientific theories when I used the dialysis tubings to form as cells. I properly calculated mathematics by using the percent change formula. I feel I gained more knowledge by questioning and forming my beginning hypothesis for each step.
Sunday, July 21, 2019
Steps in System Design
Steps in System Design CHAPTER 3 HIGH LEVEL DESIGN 3.0 High Level Design The high level design discusses an overview of how a system be supposed to work and how the higher stage sections to contains the suggested answer. It would be supposed to have very less information about implementation that is no clear class descriptions and during case not even details such as data base type (relational or object) programming language and platform. High level design gives an overview of system flow. However, this gives more information for the user to understand the logic. Here we see the basic knowledge about the system design and architecture. Following are the issues that we see in this part which are the primary components for the design. 3.1 Design Considerations The key design considerations of deadline constraints broadcasting in wireless network are: Creation of network with twenty nodes, including the base station node and its client nodes. Broadcasting the packets by base station to its nodes. Calculating all the measures and getting feedback information from all nodes for the transmission. According to which designing the three main scheduling policies for the broadcasting delay in the network. Network which does not uses network coding mechanism, designing the greedy scheduling policy. Network which uses the network coding mechanism for which designing the linear coding scheduling policy and pair wise XOR scheduling policy. Finally performance analysis is done for each scheduling policy, considering the deterministic, probabilistic arrivals of packets for asymmetric and symmetric topology. 3.2 System Architecture of Deadline Constraints Broadcasting in Wireless Network System Architecture of deadline constraints broadcasting in wireless network in shown in figure 3.1 System architecture is the theoretical design that describes the structural and behavioral features of a system. The description of the architecture is the official explanation of the system. That is arranged in the form that maintains interpretation concerning the structural possessions of the system. And it characterizes the system apparatus or building blocks and gives a preparation from which yield can be procured and systems are developed that are work jointly to apply in general system. The base station will broadcast the arrival of packets using different types of systems like greedy scheduler, pair wise XOR, linear coding and feedback scheduler to the particular nodes. Design feasible optimal policy for the broadcasting of delay in traffic. Since the base station will not having any idea regarding feedback information from all its client nodes, it cannot identify the real timely throughput established by each client node for the flow of packets. Though, with the knowledge of channel reliabilities, the base station will calculate approximately the timely throughputs by measuring the possibility that a client node gains the packet of a flow in every time gap. There is stationary randomized scheduling policy and a positive number, which decides a schedule arbitrarily from the scheduling space where it is based on the packet coming at the creation of the period and self directed of the system history before the time interval that accomplish the system with timely throughput supplies. A system with any coding mechanism, a designing policy aims to maximize, a policy is feasible optimal. Three different kinds of coding mechanisms, first think about a system where network coding is not been used. In each time slot, the base station will broadcast the unprocessed packet from the stream that has been produced one packet in the time interval. Deduce a few separation of flows has been produced packets at the starting of the interval the probability that client receives the packet from flow in this interval. Since the base station can make broadcasts in an interval. The probability that client has not received the packet from flow during the first transmissions, and receives this packet when the base station broadcasts the packet from flow for the next time. Thus, classify the subjective trivial liberation chance of the broadcast of an online scheduling Greedy algorithm. The use of pair wise XOR coding for broadcasting, the base station can either broadcast a raw packet from a flow, or it can choose to broadcast an encoded packet from flow packet from flow, the XOR of a packet from flow with a packet from flow. A client can recover the packet from flow either upon directly receiving a raw packet from flow, or upon receiving a raw packet from flow and an encoded packet. Consider a system with two streams of flow of packets that produce single packet in every interval with only individual client whose direct reliable. Assume that there are six time slots in an interval. Suppose that the base station transmits each packet three times in an interval. Thus, a system with timely throughput requirements is not possible when complex network coding is not in use. Thus system with pair wise XOR coding can achieve strictly better performance than one without network coding. By employing linear coding in the direction to advance the performance of dissemination delay constraints flow of packets besides the unprocessed packets the base station can also transmit small packages that having linear grouping of packets from any streams of flows. The consumer can decipher all packets from the separation of streams if it receives at least packets that having linear grouping of packets from those stream of flows. If a client receives less packets having linear combination of groups cannot be decoded from those flows of packets. Figure 3.1: System Architecture of deadline constraints broadcasting in wireless network 3.3 System Specification using Use Case Diagram Use case diagrams are represents the typically noticeable interactions with the aim of the system will perform with the users and external systems. They are exercised to depict in what way the user can carry out the role by means of the systems and it form an important part of the progress of the method. Use case diagrams describe schedules of work, user guides, test plans and are functional all the way through the whole development progression. Use case models use a concept known as actors to visualize what is deemed to be outside the system. The use case also describes about the exterior unit will interrelate with the system and the work that the system will need to perform. Use case scenarios that describe how actors use the system. The actors are external factors that interact with the system. Actors are identified based on who is using the system or who will be using the system. The actor represents the role a user plays with respect to the system. Identifying actors is an important as identifying classes, structures, attributes, associations and behavior. 3.3.1 Use Case Diagram for Deadline Constraints Broadcasting in Wireless Network Use case Diagram of deadline constraints broadcasting in wireless network is shown in figure 3.2. Figure 3.2: Use case Diagram of deadline constraints broadcasting in wireless network Name of the module: deadline-constrained broadcasting in wireless network. External users or actors: base station and client node. Functionality of the system: functionality of the system includes adding flow and broadcasting flow. Broadcasting flow has the functions like greedy scheduler, pair wise XOR scheduler, linear scheduler and feedback scheduler. Description of deadline-constrained broadcasting in wireless network: The use case diagram of the deadline-constrained broadcasting in wireless network shown in figure 3.3. The base station used to add flow and broadcast the flow in the network, where it can use any technique to broadcast the delay in the network like it may use non coding mechanism by using greedy scheduler policy, and coding mechanism by introducing pair wise XOR scheduler policy, linear scheduler policy and it may use feedback scheduler policy. There by base station broadcast the delay to the respective client nodes. 3.4 Data Flow Diagram for Deadline Constraints Broadcasting in Wireless Network A data flow diagram is a graphical depiction where the data flows all the way through an information system. It is also used for the visualization of data processing that is structured design. In DFD information flows from the external source or an internal process towards the internal information store or the external information drop through is the midway course. Level_0 The context-level or level 0 data flow diagram describes the interface between the method and external agents which operate as data sources and data sinks. Scheduled on top of the background diagram also termed as the Level 0 DFD where the systems interfaces with the outside world are modeled merely during the data flows crossways the system edge. In the context diagram the complete system as only one process and provides no clues to its own internal group. Figure 3.3: Level 0 Data flow diagram for deadline constraints broadcasting in wireless network 3.4.1 Data Flow Diagram for Deadline Constraints Broadcasting in Wireless Network Level _1 The Level 1 DFD describes about the division of sub systems of the complete system and each of the sub systems deals with at least one of the data flows to or from the outside way and which together provides all of the functionality of the process. It is also recognize the internal data provisions that should there in sort of the progression to do the work and it illustrates the flow of information among the diverse parts of the procedure. Figure 3.4: Data Flow Diagrm of Probability data flow for deadline constraints broadcasting in wireless network Table 3.1: Transmission of packet of different flow deadline constraints broadcasting in wireless network 3.4.2 Data Flow Diagram of XOR coding for Deadline Constraints Broadcasting in Wireless Network Figure 3.5: Data flow diagram of XOR coding for deadline constraints broadcasting in wireless network Table 3.2: Transmission of XOR coding for deadline constraints broadcasting in wireless network 3.4.3 Data Flow Diagram of Linear coding for Deadline Constraints Broadcasting in Wireless Network Figure 3.6: Data flow diagram of linear coding for deadline constraints broadcasting in wireless network Table 3.3: Transmission of linear coding for deadline constraints broadcasting in wireless network 3.4.4 Data Flow Diagram of Broadcasting packets for Deadline Constraints Broadcasting in Wireless Network Figure 3.7: Data flow diagram of broadcast packet for deadline constraints broadcasting in wireless network Table 3.4: Transmission of broadcast packet for deadline constraints broadcasting in wireless network 3.5 Sequence diagram for Deadline Constraints Broadcasting in Wireless Network Sequence diagrams display interactions between the objects from temporal standpoint. A sequence diagram represents an interaction between objects that focuses on the message. An object is represented by rectangle and its lifeline is represented by a vertical bar line. Initialization Flow The sequence diagram of the initial flow is shown in figure 3.8. STEP 1: The admin directs the main to create the new network and the network is created. STEP 2: The new base station is created by the network by main through admin. STEP 3: The new node is created by the network by main through admin. STEP 4: The network is shown by network through the main and admin. Figure 3.8: Sequence diagram for Initialization Flow Greedy Scheduler The sequence diagram of the greedy scheduler is shown in figure 3.9. STEP 1: The admin add the flow by base station and starts broadcasting of packets. STEP 2: The new base station is starts scheduling of the packet flow to greedy scheduler. STEP 3: The greedy scheduler sends back the packet flow once it done coding. STEP 4: Then broadcasting takes place from base station to node. Figure 3.9: Sequence diagram for Greedy Scheduler Linear coding scheduler The sequence diagram of the linear coding scheduler is shown in figure 3.10. STEP 1: The admin add the flow by base station and starts broadcasting of packets. STEP 2: The new base station is starts scheduling of the packet flow to linear coding scheduler. STEP 3: The linear coding scheduler sends back the packet flow once it done coding. STEP 4: Then broadcasting takes place from base station to node. Figure 3.10: Sequence diagram for Linear coding scheduler Feedback scheduler The sequence diagram of the feedback scheduler is shown in figure 3.11. STEP 1: The admin add the flow by base station and starts broadcasting of packets. STEP 2: The new base station is starts scheduling of the packet flow to feedback scheduler. STEP 3: The feedback scheduler sends back the packet flow once it done coding. STEP 4: Then broadcasting takes place from base station to node. Figure 3.11: Sequence diagram for Feedback scheduler Pair wise XOR scheduler The sequence diagram of the pair wise XOR scheduler is shown in figure 3.12. STEP 1: The admin add the flow by base station and starts broadcasting of packets. STEP 2: The new base station is starts scheduling of the packet flow to pair wise XOR scheduler. STEP 3: The feedback scheduler sends back the packet flow once it done coding. STEP 4: Then broadcasting takes place from base station to node. Figure 3.12: Sequence diagram for Pair-wise XOR scheduler 3.6 Classes Designed for the system The class diagram is the major structural block of objective leaning modeling. Class diagrams can be used for information modeling. The classes in a class diagram shows both the major objects and communications in the systems and the classes exist to program. It is used both for general conceptual modeling, for systematic applications, detailed modeling, and for converting the models into encoding rules. In the diagram classes are presented with boxes shapes which have three parts. The upper part of box has the name of the class The middle part contains the attributes of the class The bottom part of box produces the processes or functions the class has to perform The design of a system has the number of classes that are recognized and joined together in the class diagram which assists to find out the relations among objects. The attribute shows the passage thread that is parsed in the variety of properties of the characteristic form component. Operation is used to show operations defined on classes. It is the service of an instance that the class is requesting to perform the function is as shown in the text string that may be parsed to the different properties of an operation function of the model component. There are relations between the different classes in the class diagram that are represented using the following notations. Composition ( ) is a very strong option of the possess association relationship, composition is specific. Composition has a strong existence cycle dependent among occurrences of the container class and occurrences of the contained module. If the container is cracked or damaged normally every occurrence that it contains is destroyed fully. Generalization ( ) specifies that one of the two connected program (the subclass) is measured to be a dedicated form of the other program (the super type) and super class is well thought out as ââ¬Ëgeneralizationââ¬â¢ of subclass. This way any occurrence of the subtype class is also the example of the super class. Multiplicity notations are positioned near the endings of a relationship. And these signs specify the number of occurrences o single class linked to one occurrences of the other class, ââ¬Ë1ââ¬â¢ states that no more than one instances are used, and ââ¬Ë0..*ââ¬â¢ states that zero or many instances are used. Figure 3.13: Classes diagram for deadline constraints broadcasting in wireless network The class diagram for deadline constraints broadcasting in wireless network is represented in figure 3.13. the figure shows the main class, which defines the operations +createNetwork( ), +add BS( ), +add Node(), +show Network(). The class network defines the operation, +add BS(), +add Node(), +show Network(), with one -to-one aggregation to main class. The class Base station defines the operation, +add Flow(), +broadcastPacket(), +sendPacket(), with one -to-one aggregation to network class. The class Node defines the operation, +collectPacket() with generalization to statistics class it also defines many-to-one aggregation with network class The class greedy scheduler, linear coding scheduler, feedback scheduler, pair wise XOR scheduler, defines the operations +schedulePacketFlow() with respect to their scheduling principles, and they are one-to-one aggregation with the class Base station. Summary In this chapter, a brief overview of design consideration, system architecture, design steps is presented and further discussion of the use case diagrams, class diagrams, data flow diagrams and sequence diagrams next chapter discusses detailed design of the system.
Saturday, July 20, 2019
Joyceââ¬â¢s portrayal of thought in Eveline Essay -- James Joyce Dubliners
Joyceââ¬â¢s portrayal of thought in ââ¬Å"Evelineâ⬠Among the short stories in the collection Dubliners by James Joyce, ââ¬Å"Evelineâ⬠is a story wherein the reader views the world through the eyes of the eponymous heroine. In delineating her contemplations, Joyce mainly uses the third person narrative with traces of free indirect discourse. The narration sequence at first glance appears to be highly disconnected. However, it is through the judicious use of both these devices that Joyce succeeds in portraying ââ¬â with a great deal of realism ââ¬â the progression of thought in the human mind. By using this peculiar mode of narration, Joyce makes us realize that, the process of thinking is not crisp and continuous after the fashion of a well-crafted chain of deductive logic. Rather, this reader is presented with a different paradigm ââ¬â that of staccato bursts mistily but surely connected by the wispy links of key phrases and events. The unmistakable message Joyce leaves us with is that human thought does not proceed in a straight line. ââ¬Å"Evelineâ⬠is the story of a young girl ââ¬â her memories, fears and aspirations. It is no mean feat to convey the naked thoughts of a human being, to paint the dull and the bright shades of feeling with like fidelity and to bring back what has been lost during the translation to words. We can start to appreciate how Joyce does this by considering the distribution of sentences in some of the paragraphs in the story. At first sight, the sentences appear to be rather slapdash in that they do not bear the mark of being part of a continuous sequence of logical thought, as one would expect from a piece of formal writing. The following lines illustrate this point: ââ¬Å"...she heard his footsteps clacking along th... ...e shift from past to present. One could say that it is the pivot about which the frame of reference is rotated from past into present. Of course, this is merely the most explicit example of such temporal shifts that abound in this work. It should be noted however that rarely does such a shift occur in the actual tense of the verbs involved. Rather, Joyce hints at it by using devices such as that discussed above. We can thus see that Joyce succeeds to a great extent in charting the currents of thought in the mind of his protagonist in a most realistic way. The devices used are subtle and ingenious and one might say ââ¬â considering the period in which he created ââ¬Å"Evelineâ⬠ââ¬â very unconventional. While Joyceââ¬â¢s breaking of conventions is apparent in ââ¬Å"Eveline,â⬠it is his novels, ââ¬Å"Ulyssesâ⬠and ââ¬Å"Finneganââ¬â¢s wakeâ⬠that offer a wider scope for this literary avant-garde.
Friday, July 19, 2019
An Analysis of Religion by an Athiest Essay -- essays research papers
à à à à à The person as a whole, mind and body, is a very complex and unique organism that can be easily influenced by society. Since people are so easily susceptible to be influenced by others, each person must rely on their beliefs in order to make a judgment that is morally and ethically pleasing through their knowledge and experiences. A personââ¬â¢s morals and ethics are formed through their religious beliefs and practices. Morals and ethics allow one to make a knowledgeable and responsible decision. Oneââ¬â¢s religious and spiritual beliefs shapes and molds the mind, body, and spirit of the person. Each religion has its own unique principles, a list of doââ¬â¢s and donââ¬â¢ts that set the foundation for their moral and ethical beliefs. Everyday people are presented with situations in which that person must arrive at the solution through weighing each possible option morally and ethically. When one is confronted with a situation in which they must use thei r personal knowledge, experience, spiritual beliefs and practices to weigh each option morally and ethically and choose that which best suits their religious beliefs. In order for a person to be able to correctly analyze and weigh each option he or she should have full knowledge of each available option and their outcomes. To weigh each solution properly, a person must use his or her religious beliefs and knowledge to evaluate every aspect of the option. In religion, there are four main factors that make it possible for a religiously enlightened person to decipher between the morally and ethically correct and wrong decision. People are educated through the teachings and beliefs of their God to acknowledge what ââ¬Å"the beautifulâ⬠and ââ¬Å"the sacred and transcendentâ⬠are and how to decipher between what is good and what is evil. A religionââ¬â¢s depiction of what ââ¬Å"the beautifulâ⬠, sacred, and transcendentâ⬠are creates oneââ¬â¢s basis for their moral and ethical beliefs. Through oneââ¬â¢s spiritual knowledge and understanding of ââ¬Å"the beautifulâ⬠, sacred, and transcendentâ⬠allows one to distinguish between ââ¬Å"the goodâ⬠and ââ¬Å"the evil.â⬠In order for a person to choose the best decision he or she has to have a firm grasp, intellectually and spiritually, on the concepts of ââ¬Å"the beautifulâ⬠, ââ¬Å"the sacred and transcendentâ⬠, ââ¬Å"the goodâ⬠, and ââ¬Å"the evilâ⬠. The concepts of each of the factors must be fully understood by him or her to de... ...dered to be the highest forms of evil. For some the temptation they sense from evil is irresistible and they commit a sin for which they cannot be forgiven. I believe that it is through oneââ¬â¢s spiritual, physical, and mental strength that he or sheââ¬â¢s ability to decipher between ââ¬Å"the good and ââ¬Å"the evilâ⬠is developed. The stronger the person, the less susceptible he or she is to ââ¬Å"the evil,â⬠vice-versa. I believe that the will and overall strength of the person develops their ability to fight ââ¬Å"the evil.â⬠ââ¬Å"The evil, the good, the sacred and transcendent, and the beautifulâ⬠are all determined through the religious practices and beliefs of an individual. As a result, the person must use his or her knowledge of good and evil to develop their own moral and ethical standards according to the teachings of Jesus Christ. Using these standards people combine their spiritual and intellectual knowledge of ââ¬Å"the beautiful, t he sacred and transcendent, the good, and the evilâ⬠to decipher ââ¬Å"the goodâ⬠from ââ¬Å"the evil.â⬠Without religious experience and practices we would not have the information available to consciously choose ââ¬Å"goodâ⬠over ââ¬Å"evilâ⬠and strive for spiritual, physical, and mental perfection. An Analysis of Religion by an Athiest Essay -- essays research papers à à à à à The person as a whole, mind and body, is a very complex and unique organism that can be easily influenced by society. Since people are so easily susceptible to be influenced by others, each person must rely on their beliefs in order to make a judgment that is morally and ethically pleasing through their knowledge and experiences. A personââ¬â¢s morals and ethics are formed through their religious beliefs and practices. Morals and ethics allow one to make a knowledgeable and responsible decision. Oneââ¬â¢s religious and spiritual beliefs shapes and molds the mind, body, and spirit of the person. Each religion has its own unique principles, a list of doââ¬â¢s and donââ¬â¢ts that set the foundation for their moral and ethical beliefs. Everyday people are presented with situations in which that person must arrive at the solution through weighing each possible option morally and ethically. When one is confronted with a situation in which they must use thei r personal knowledge, experience, spiritual beliefs and practices to weigh each option morally and ethically and choose that which best suits their religious beliefs. In order for a person to be able to correctly analyze and weigh each option he or she should have full knowledge of each available option and their outcomes. To weigh each solution properly, a person must use his or her religious beliefs and knowledge to evaluate every aspect of the option. In religion, there are four main factors that make it possible for a religiously enlightened person to decipher between the morally and ethically correct and wrong decision. People are educated through the teachings and beliefs of their God to acknowledge what ââ¬Å"the beautifulâ⬠and ââ¬Å"the sacred and transcendentâ⬠are and how to decipher between what is good and what is evil. A religionââ¬â¢s depiction of what ââ¬Å"the beautifulâ⬠, sacred, and transcendentâ⬠are creates oneââ¬â¢s basis for their moral and ethical beliefs. Through oneââ¬â¢s spiritual knowledge and understanding of ââ¬Å"the beautifulâ⬠, sacred, and transcendentâ⬠allows one to distinguish between ââ¬Å"the goodâ⬠and ââ¬Å"the evil.â⬠In order for a person to choose the best decision he or she has to have a firm grasp, intellectually and spiritually, on the concepts of ââ¬Å"the beautifulâ⬠, ââ¬Å"the sacred and transcendentâ⬠, ââ¬Å"the goodâ⬠, and ââ¬Å"the evilâ⬠. The concepts of each of the factors must be fully understood by him or her to de... ...dered to be the highest forms of evil. For some the temptation they sense from evil is irresistible and they commit a sin for which they cannot be forgiven. I believe that it is through oneââ¬â¢s spiritual, physical, and mental strength that he or sheââ¬â¢s ability to decipher between ââ¬Å"the good and ââ¬Å"the evilâ⬠is developed. The stronger the person, the less susceptible he or she is to ââ¬Å"the evil,â⬠vice-versa. I believe that the will and overall strength of the person develops their ability to fight ââ¬Å"the evil.â⬠ââ¬Å"The evil, the good, the sacred and transcendent, and the beautifulâ⬠are all determined through the religious practices and beliefs of an individual. As a result, the person must use his or her knowledge of good and evil to develop their own moral and ethical standards according to the teachings of Jesus Christ. Using these standards people combine their spiritual and intellectual knowledge of ââ¬Å"the beautiful, t he sacred and transcendent, the good, and the evilâ⬠to decipher ââ¬Å"the goodâ⬠from ââ¬Å"the evil.â⬠Without religious experience and practices we would not have the information available to consciously choose ââ¬Å"goodâ⬠over ââ¬Å"evilâ⬠and strive for spiritual, physical, and mental perfection.
The Man In The Moon :: essays papers
The Man In The Moon I lie on the grass, staring above me, my arms stretch high into the starlit sky, they warp and twist and elongate and they reach up and my hands grasp the moon and its mine and no-one else's and my fingers become a part of it and then I'm the moon, look at me I'm the Man in the Moon and I Can See All, I Can See You, and my arm stretches down and my giant finger uncurls and points and my voice deep and booming says ITS YOU and the person I'm pointing at looks straight up at me and his arms are reaching towards me and he's smiling and then I realise with a start that its me. I get up and shake my head. Then I lie down again and shake my head. Then I sit up and shake my head and rub my eyes and scratch my head and yawn and this seems to work and so I get up. I lie down again: it didn't work. I think I'll stay here a while and think about things until I can get up and stand and maybe walk again. I may be some time. I'm looking up into the sky. Its night but its not that dark. The moon's out and so are the stars and there are no clouds in the sky. True, its not as bright as it is, say, during the day, but nevertheless it's relatively bright. It's a damn sight brighter then the inside of a really dark cave with your head covered in a thick, thick blanket with your eyes closed. But ours is not to quibble on the brightness, or lack thereof, of this night in question. So, the state of the night cleared up, I can continue. I'm looking into the sky and I'm lying on the grass, which is a little strange because grass is not, as it were, the most abundant of materials in this place. I'm lying on a small patch of such grass that is surrounded on all sides by sand. In the distance I can hear the sea and its crashing against the beach and I worry about all the poor little creatures caught in it.
Thursday, July 18, 2019
My Pawnshop
Course Project Introduction to Business (GEB 1011) Think of a small company you would like to start. Using this company, include the following components in your finalized submittal and use them as Section Headings for formatting your submittal. Put the Section Headings in BOLD. Then your responses in normal 12 point size type and write in complete sentences. 1) Provide an Introduction of your company. Include your main product and/or service. In what country and part of the world is your company located? Explain why your company is located there.With the economy struggling and more and more people loosing their jobs as a major source of income I believe that providing the service of small collateral loans would be a great idea for a business. In this economy the pawn industry is a business that is growing and taking a powerful jump in the economy. I believe that opening and place where people can get short-term loans against a collateral would be a very successful business. I would strategically pick locations in United States that really need this service the most. For example, low-income regions in Orlando such as Pine Hills, would be a good place to open a location.Last and more important, à Make sure to set up shop where the local population is interested in buying your goods Choosing a location with a population that has supply and demand for the specific products I am selling. 2) Describe the form of business ownership you would choose for this company and explain why. Give at least three advantages and three disadvantages of your chosen form of business ownership. The form of business ownership I would choose for my company would be Sole Proprietorship. A business owned and operated by a single individual ââ¬â and the most common form of business structure in the U.S. The advantages with a sole proprietorship: 1. Ease and cost of formation: simply announcing you are in business and requesting any licenses and permits you may need; use of profits à ¢â¬â since all profits from the business belong exclusively to you, the owner. 2. Flexibility and control: you make all the decisions and direct the entire business operations; very little government regulations; secrecy; and ease of ending the business. 3. Sale or transfer can take place at the discretion of the sole proprietor. There are disadvantages, however, including unlimited liability: . All business debts are personal debts, meaning you could lose everything you own if the business fails or loses a major lawsuit. 2. Limited sources of financing: based on your creditworthiness. 3. Limited skills: the sole proprietor really must be a ââ¬Å"jack-of-all-trades,â⬠part manager, marketer, accountant, etc. ; and limited lifespan meaning that the business ends when the owner dies. 3) Describe how you would use Supply and Demand to determine the products/services your company would provide. Include how this affects the pricing of your companyââ¬â¢s product/service. When supplies of goods and services become plentiful, prices tend to drop. When supplies become scarcer, prices tend to rise. â⬠à (Understanding Business, Nickels,McHugh and McHuhg P. 37. ) There are many factors that play a role in using Supply and Demand for the items that my company would be working with. The age of the item, current condition, market value, and ability to re-sell, are all taken into consideration. The market value of precious metals changes daily so this will give more flexibility to play with the loaning, buying or pricing of it.Furthermore, I would have to contemplate the supply and demand or desirability of your item. Perhaps a new product ahs made it obsolete or even decrease its value. For example, a video game system that was worth $300. 00 two years ago may be practically worthless today. With new technology in the market and depreciation of electronics an outdated platform is not going to be in high demand. Another example would be the Blue-ray player, since they have become increasingly popular and they have a high demand in the market the DVD player has depreciated in value.Therefore if a client brings a DVD player in the store the appraisal value would be lower hence the selling price. Taking these factor into consideration, the use of supply and demand would affect the pricing of my company and it would play a very big role because I am the one investing money on the collateral that the customer is bringing to the store, hence my responsibility is to have the knowledge to take smart decisions and to properly train the people that would be working for me to be capable to make smart pricing by using tools such, internet, blue book, catalogs and their experience.One advantage that my company would have is that because I am targeting low income communities the $300. 00 game system they could not afford would be selling for a much lower price at my store. The demand would be there still for the system but this time the used system would be price one third of the original price and there would be an option for that customer to put it on layaway and pay for it slowly something that is becoming popular on big retail stores now days. As the Chief Executive Officer of your company: ) Describe your companyââ¬â¢s Strategic Plan. Include a SWOT, Strength, Weaknesses, Opportunities, and Threats, analysis ((list at least three, (3) items per section)). 5) Describe how you would implement the Management Functions in your company. 6) Describe the process you would use to recruit, hire, and train your employees. 7) Describe how you would approach the marketing mix for your company (Product, Price, Place, Promotions, the 4 Ps,). 8) Describe how you would develop and use the basic accounting statements in your company.
Wednesday, July 17, 2019
Reflection Writing of The Droverââ¬â¢s Wife by Henry Lawson Essay
Ive never been reading a fantastic legend such(prenominal) The Dr ein truthwheres Wife before. The Drovers married cleaning lady was written by Henry Law countersign is a short story close to a woman who live in a bush with her four children and a cad, Aligance, firearm her husband didnt at home plate because of driving. The story losss to mention on the woman who was a thoroughly m separate and a alike a strong lady. In a dangerous event, there was a serpent in the grass in her house. In order to nourish her children she kept reminding herself all night to keep back her children who were sleeping on the table in the kitchen finally, the drovers wife and her cross killed the snake and burnt it.Actually, I do sack out two characters among all characters equal in the story. The first is drovers wife throughout the short story I get a actually good characterization of the woman. As a girl-wife she had hated the lonely life in the outback, and as while widen by, she u sed to it. Her struggle has been many. When the drought pressure her husband to go droving, she had been left all with her children and the problems in a pity bush. However, she was a strong and brave lady in fact, she had solved the entire difficult lieu without her husbands assistance. She plays an important employment in the family which she had to stay and take tending of the children alone. other she was defended mother and a good wife. In a long night, she kept her eye opening to ensure that the snake wouldnt bit any of her children.Staying and taking c be of the children alone she neither complained to the highest degree her living condition nor her husband absence. She didnt c are about herself when she fought the flood that devastated the dam up she still thought of her husbands feeling after realizing this disaster. Specially, this character has give me an idea that women should not always imprecate on men women are not as weak as what other concourse said. Wo men have strength to cherish themselves as well as their costly persons. Not only(prenominal) drovers wife unless as well as her biggest son Tommy was bravery. He helped his mom a green goddess even he was a gnomish one, his behavior is such an adult. Maybe he think that beside his father , he was the only one man to protect the part from any danger. This smart boy also remind his mother to wake him up if the snake came back again.Moreover, The Drovers Wife has remarkably little feat such as Near midnight, the children are all asleep and the drovers wife sit there still, sew and reading by turns. From magazine to cartridge holder she glances round the floor and well-plate, and, whenever she hears a noise, she reached for the stick. The electrical storm comes on, and the wind, rushing through the cracks in the slab wall, threatens to itch out her candle. She places it on a provide part of the dresser and fixes up a newspaper to protect it. At each flash of swingingning , the cracks between the slabs gleam like polished silver. The thunder rolls, and the rain comes cut back in torrents. in this plot the origin want to express the activities of being a mother who always care and dysphoric about her children. Not all people do such that thing beside mother. In case she ensures that her children are safely, she can do anything without caring much own self. Another action She lays her hand on the dogs head, and all the fierce, angry light dies out of his yellow eyes. The younger children are quieted, and presently go to sleep. The dirty-legged boy stands for a moment in his shirt, watching the fire. instantly he looks up at her, sees the divide in her eyes, and, throwing his arms around her cope exclaims Mother, I wont never go drovin blarst me if I do And she hugs him to her tire breast and kisses him and they sit thus unitedly while the sickly daylight breaks over the bush..This plot shows that if Tommy were a husband ,or when he grow up, he would not be away from home do such his father . Hes acknowledge what was the difficulty which a wife and children strained to bed situation. About drovers wife, she loves her children above all, but she has no time to show it. The children have a very harsh impression of her. Still, in the fail sentence we see proof of her love for them. What I have learnt from this story has been many. First, I understudied that on be haft of a good mother it is not easy. one-time(prenominal) they act as ignorant but their mind obsessed all the time on children however, they did not complained any words. Beside this, I caught a lot on the doings of the drovers wife we will not always get what we want, but we should learn to satisfy what we have. There are many problems and obstacles that we have to face, and all those be us become stronger and stronger, and give as such an important experience for our forthcoming steps. After reading this story, I powerfully recommend it to other people who want to learn and experience much about life. Also lecturer should have go up thisstory to discuss much more and deeply on it, because student whitethorn benefit a lot from this story.
Subscribe to:
Posts (Atom)